Kể từ đây mỗi ngày một lần nữa và một lần nữa vấn đề với các USB cài đặt trình điều khiển VCOM cho MTK6577 xuất hiện điện thoại, đây là một hướng dẫn ngắn để cài đặt, và một thử nghiệm thành công cuối cùng với SPFlashtool!
Cài đặt trình điều khiển USB VCOM:
[1] Với USBDeview, làm sạch máy tính của bạn từ tất cả các mục cũ MTK VCOM có thể, sau đó khởi động lại máy tính của bạn.

[2] Smartphone is switched off, and still dont connect via USB to the PC.
[3] Open Device Manager and leave it open!
[4] Your switched off Smartphone with inserted rechargeable battery via USB connect now on the PC, you should now see a MT65xx preloader in the Device Manager.
(With some MTK6577 Smartphones should be installed without battery. Please before hand inform.)

[5] now launch the Installdriver.exe from the unzipped MT6577 USB VCOM drivers folder. Confirm the installation of unsigned drivers

[6] now! (W7 x 64 this confirmation comes later in the manual installation!) After the installation is complete, you have no entry in the Device Manager, it is correctly!


[7] PC reboot!
[8] Open Device Manager and open the switched-off Smartphone via USB to the PC release, now connect (same USB port!)
[9] Now a MediaTek PreLoader USB VCOM should appear for a brief moment in the Device Manager entry!

[10] At the moment the entry double click and click on “Update driver” under the tab “Driver”.
[11] With the wizard in the unzipped MTK 6577 USB VCOM drivers navigate and select the folder for your operating system.



[TUT] Instructions MTK6577 USB VCOM Driver Installation
Comments[ 0 ]
Post a Comment